Open 8am to 8pm, seven days a weekDealsAboutCareers
(301) 888-5152

Storage Unit Lockout: What to Do, Step by Step

Hand holding a key next to a disc lock on a closed metal storage unit door

A storage unit lockout usually starts the same way: you drive over to pull out winter coats or a box of holiday decorations, and the key is not on your ring, the combination will not come back to you, or the lock simply will not turn. It is a solvable problem, and it goes faster when you take the steps in order. The first call goes to the facility office, and the second, if you need one, goes to a locksmith who will work with the office to remove the lock properly and fit a new one.

Late October is when a lot of people across Montgomery County, Prince George’s County and DC swap seasons in their units, putting away patio cushions and coolers and bringing home cold-weather gear. Units that have not been opened since spring are where forgotten combinations and seized locks tend to show up.

First, figure out which kind of lockout you have

Take a minute at the door to work out what is going on. The fix depends on it.

  • Lost or missing key. The lock works, you just cannot open it.
  • Forgotten combination. Common with combination padlocks that only get used a few times a year.
  • Key goes in but will not turn. Often a worn key, or a lock that has rusted or seized after months outdoors.
  • Broken key. Part of the key is stuck inside the lock.
  • A second lock you did not put there. If there is an extra lock or a tag on your unit, that is usually the facility’s own lock, often called an overlock.

That last case is different from the others, so it gets its own step below.

Step 1: Talk to the facility office before anything else

Go to the office, or call the number posted at the gate, during business hours. Storage operators generally ask tenants not to cut their own locks. StorageMart, for example, tells customers who lose a key to contact the manager and warns that cutting your own lock can damage the facility or your property.

The office will want to confirm that you are the tenant on the rental agreement. Expect to show government ID. If the unit is in a relative’s name, or you are clearing out a unit for a family member, ask the office exactly what paperwork they need. Each facility sets its own rules for that, and it is much easier to sort out before a technician arrives.

Ask the office two more things: whether they allow outside locksmiths on site, and what their gate and office hours are. A locksmith can only work when you and they can both get through the gate.

Step 2: Check for a facility lock or account hold

If your gate code is being denied, or there is a second lock on your door, the facility may have placed a hold on the unit, usually over an unpaid balance. Storage operators use the term overlock for this: an extra lock the facility adds that stays on until the account is settled.

A locksmith cannot help with this one, and we will not try. Master Locksmith does not remove a lock that the facility itself has placed on a unit. The only way past an overlock is through the office. Once the account is sorted out, the facility removes its own lock, and if you also cannot open your own lock after that, we can help with the rest.

Step 3: Have the right things ready before you call a locksmith

Once the office has confirmed you are the tenant and is fine with the lock coming off, a mobile locksmith can come to the facility. To keep the visit short, have these ready:

  • Your government ID, matching the name on the rental agreement
  • Your gate code, or a plan with the office to let the technician in
  • The facility address and your unit number
  • The type of lock on the door, if you know it: disc lock, padlock or a cylinder lock built into the door
  • The office hours, so the visit lands when someone is there to sign off

When you call Master Locksmith, we give you a clear quote and an honest ETA before a technician is dispatched, so you know what to expect before anyone heads your way. There are no hidden fees added at the door.

What happens at the storage unit lockout visit

A professional visit should feel orderly. Here is how it goes with us:

  1. Verification. The technician checks your ID, and the facility office signs off on the removal. A good locksmith will not open a unit without both. If someone offers to skip this step, treat that as a warning sign.
  2. Options explained. If the lock can be opened without removal, we say so. If it has to come off, we explain that before starting.
  3. Removal. Depending on the lock type, it is drilled or cut, done in a way that does not harm the door latch.
  4. A new lock on the spot. We can fit a new disc lock or padlock right away, so you can lock up before you leave.

Our technicians work from service vans, so most storage unit lockouts are handled in one visit.

Why the lock type matters for next time

Storage facilities often recommend disc locks, and there is a practical reason. StorageCafe notes that a standard padlock’s thin, exposed shackle is easier to cut. The shackle on a disc lock is hard to reach without special tools. That same toughness is why a disc lock takes proper tools to remove when the key is gone, and why cutting it yourself rarely goes well.

If your unit came with a cylinder lock built into the door, ask the facility whether it was changed after the previous tenant. If it was not, someone else may still have a working key.

A few habits make the next season easier:

  • Keep a spare key somewhere at home that is not on your everyday ring.
  • If you use a combination lock, store the combination somewhere secure that you can reach from your phone.
  • Open and close the lock each time you visit, even if you only stop by briefly, so a stiff mechanism shows up early.
  • Check that your gate code still works before a big pickup day, such as moving furniture or pulling out holiday decorations.

Be careful who you call

With a truck waiting, it is tempting to call the first number that comes up. Take a moment anyway. A legitimate locksmith will ask for ID, will work with the facility office, and will give you a quote and an ETA before coming out. Our guide on how to verify a legitimate locksmith in Maryland covers what to ask on the phone.

Common questions

Can the storage facility just give me a copy of my key?

Usually not. In most facilities the tenant supplies and controls their own lock, so the office does not hold a copy. That is why the lock normally has to be removed and replaced.

Can you open a storage unit in a family member’s name?

Only with the facility’s approval. The office decides what documents it needs for a unit in someone else’s name, so check with them first and bring that paperwork with you.

Locked out of your unit? Here is your next step

Start with the facility office, then call us for help with storage unit lockout service. We offer same-day service 8am to 8pm, seven days a week. Call Master Locksmith at (301) 888-5152 for a clear quote and an honest ETA before we head out.

Need help with this?

Related guides

Need a locksmith today?

Call now. You get a quote and an honest ETA before anyone is dispatched.

(301) 888-5152
Call (301) 888-5152Call me back